* Maximo Solvent Based Liquid Glass protector should be used on the kitchen counter.
You can use our Stella Water Based Liquid Glass (optionally Maximo Liquid Glass) protective product on
ceramic / tiles, parquet, other floors and surfaces.
** Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
*** Water should not be allowed to accumulate for the first 7 days, it should be protected against impacts.
After 7 days, you can use chemical cleaners according to the points specified in the “things to consider after application” section of the detailed explanation below.
How is Stella wood pattern application made?
3 hours after the application of 2 layers of subfloor with Bianca Stella paint is completed, you can give a wooden appearance on any surface with Bianca Stella wood colors.
Generally preferred floor colors for wood pattern application are tones such as paper bag and sand beige.
Required materials for application
It is a cutting brush and / or sponge, depending on the floor to be applied and the way of application.
Wood image with Stella wood colors
Pour the required amount of Stella wood color into an empty container and add water at the same rate and mix until it becomes homogeneous. Always apply in one direction and as a single layer, always staying on the same plane with the help of a shortcut brush or sponge.
Protective Liquid Glass application
For Kitchen Countertops:
You should use our Vetro Liquid Glass transparent protective product on Bianca Stella paint to make it more useful.
You can proceed to the 1st layer application 24 hours after the wood pattern application is finished. The interval between coats is 24 hours. For coat application, mix half of component A (large amb.) and half of component B (small amb.). Mix the mixture for 30-40 minutes. Apply it by spreading it with the help of a velvet varnish roller. Take care not to make repeated brush and roller strokes on the dry spots.
For the second layer application, mix and apply the remaining amount in the same way after 24 hours.
For ceramic / tile, parquet and other floors and surfaces:
You should use our Bianca Stella Water Based Liquid Glass transparent protective product on Bianca Stella paint to make it more useful on the floor.
Stella Liquid Glass is ready to use. Mix until homogeneous.
6 hours after the wood pattern application is finished, you can proceed to the 1st layer application with a velvet varnish roller. Between coats is 4 hours.
Things to consider after application
First 2 days
Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
First 7 days
Water accumulation should not be allowed. The wetted area should be dried with a dry cloth or paper towel. It should be protected against impacts, heavy objects should not be placed on the surface, should not be pushed or pulled.
After 7 days
It is not recommended to use bleach directly after the application is completed. If it needs to be used, it is recommended to be diluted with water. Detergent, oil remover, stain remover, dish soap, vinegar water and similar can be used during cleaning. Dish sponge can be used. Wire should not be done. It should not be contacted with lime remover, salt spirit, sink opener, substances containing high percentage of alcohol, thinner, disinfectant.
