* To be more useful, you should use our Bianca Stella Water Based Liquid Glass or Bianca Maximo Solvent Based Liquid Glass transparent protective product on Bianca Stella paint.
** Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
*** Water should not be allowed to accumulate for the first 7 days, it should be protected against impacts.
After 7 days, you can use chemical cleaners according to the points specified in the “things to consider after application” section of the detailed explanation below.
How to paint parquet with Stella?
Thanks to the superior and unique formula of Bianca Stella Pure Acrylic Paint, you can easily renew your old or want to change color with the wood-like laminate flooring application without breaking them.
Required materials for application
Moher roller or velvet varnish roller is a silk brush for narrow and protruding areas, depending on the surface to be applied.
Preparation before Stella paint application
The surfaces to be applied should be cleaned of all kinds of dust, dirt and oil, and sandpaper should be done when necessary. Since paint cannot adhere to oily, silicone and residue areas, the surface must be cleaned with chemical cleaners and degreaser should be used when necessary. Since the paint cannot adhere to areas that are not cleaned well, the application is repeated after the problem area is cleaned and dried.
The most important preparatory step before the paint application is cleaning. You can also complete this step using vinegar. Rusty and potentially rusty areas should be cleaned with sandpaper and protected with Bianca Antipas. If there is a floating, raised or swollen part on the surfaces to be painted, it should be repaired. If there is a coating and it is not solid, removing the coating will provide better results.
After cleaning, make sure that the environment is completely dry. If necessary, the surface should be dried with a dryer.
Stella Paint application
With 1 liter of Bianca Stella, you can paint 10 – 12 m² of area in two layers. Stella is ready to use. Mix until it becomes homogeneous without thinning. Pour enough paint into a suitable tray.
Complete the first coat application with a mohair roller or velvet varnish roller, which gives the best results on the surface, and a silk brush in narrow and protruding areas where the roller cannot reach. Using your brush and roller at right angles with enough paint is very important for surface smoothness. Apply your paint to the surface at the appropriate rate and be careful not to make brush and roller strokes on the dry spots.
In suitable weather conditions, you can switch to the second coat application after 2 – 3 hours.
If a wooden pattern application is to be made, the generally preferred floor colors are tones such as paper bag and sandbeige.
Wood image with Stella wood colors
After 3 hours, you can give a wooden look with Bianca Stella wood colors on the counter, whose subfloor application is finished. (optional)
Pour the required amount of Stella wood color into an empty container and add water at the same rate and mix until it becomes homogeneous. Always apply in one direction and as a single layer, always staying on the same plane with the help of a shortcut brush or sponge.
Protective Liquid Glass application
You should use our Bianca Stella Water Based Liquid Glass transparent protective product on Bianca Stella paint to make it more useful.
Stella Liquid Glass is ready to use. Mix until homogeneous.
6 hours after the Stella paint application is finished, you can proceed to the 1st layer application with a velvet varnish roller. Between coats is 4 hours.
Things to consider after application
First 2 days
Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
First 7 days
Water accumulation should not be allowed. The wetted area should be dried with a dry cloth or paper towel. It should be protected against impacts, heavy objects should not be placed on the surface, should not be pushed or pulled.
After 7 days
It is not recommended to use bleach directly after the application is completed. If it needs to be used, it is recommended to be diluted with water. Detergent, oil remover, stain remover, dish soap, vinegar water and similar can be used during cleaning. Dish sponge can be used. Wire should not be done. It should not be contacted with lime remover, salt spirit, sink opener, substances containing high percentage of alcohol, thinner, disinfectant.
