* Maximo Solvent Based Liquid Glass protector should be used on the kitchen counter.
You can use our Stella Water Based Liquid Glass (optionally Maximo Liquid Glass) protective product on
ceramic / tiles, parquet, other floors and surfaces.
** Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
*** Water should not be allowed to accumulate for the first 7 days, it should be protected against impacts.
After 7 days, you can use chemical cleaners according to the points specified in the “things to consider after application” section of the detailed explanation below.
How is Stella marble pattern application made?
With Bianca Stella paint, you can give a marble look with marble effect spray on any surface 3 hours after the application of 2 layers of subfloor is finished.
Protective Liquid Glass application
For Kitchen Countertops:
You should use our Maximo Solvent Based Liquid Glass transparent protective product on Bianca Stella paint to make it more useful.
You can proceed to the 1st layer application 20-30 minutes after the marble pattern application is finished. Waiting time between floors is 24 hours. For 1st layer application, mix half of component A (large amb.) and half of component B (small amb.). Mix the mixture for 30-40 minutes. Apply it by spreading it with the help of a velvet varnish roller. Take care not to make repeated brush and roller strokes on the dry spots.
For the second layer application, mix and apply the remaining amount in the same way after 24 hours.
For ceramic / tile and other floors and surfaces:
You can use our Bianca Maximo Solvent Based Liquid Glass (optional Stella Water Based Liquid Glass) transparent protective product on Bianca Stella paint to make it more useful on the floor.
Stella Liquid Glass is ready to use. Mix until homogeneous before use.
20-30 minutes after the marble pattern application is finished, you can proceed to the 1st layer application with a velvet varnish roller. Waiting time between coats is 4 hours.
Things to consider after application
First 2 days
Application surfaces should not be used for 1 day, and surfaces exposed to water should not be used for 2 days.
First 7 days
Water accumulation should not be allowed. The wetted area should be dried with a dry cloth or paper towel. It should be protected against impacts, heavy objects should not be placed on the surface, should not be pushed or pulled.
After 7 days
It is not recommended to use bleach directly after the application is completed. If it needs to be used, it is recommended to be diluted with water. Detergent, oil remover, stain remover, dish soap, vinegar water and similar can be used during cleaning. Dish sponge can be used. Wire should not be done. It should not be contacted with lime remover, salt spirit, sink opener, substances containing high percentage of alcohol, thinner, disinfectant.
